Greensand Plus 1/2 cu.ft. 42 lbs

•Iron reduction over wide pH range
•Effective reduction of hydrogen sulfide in addition to iron and/or manganese
•No harmful effect from a chlorine feed
•Low attrition for long bed life
Manganese Greensand is formulated from a glauconite greensand which is capable of reducing iron, manganese and hydrogen sulfide from water through oxidation and filtration. Soluble iron and manganese are oxidized and precipitated by contact with higher oxides of manganese on the greensand granules. The hydrogen sulfide is reduced by oxidation to an insoluble sulfer precipitate. Precipitates are then filtered and removed by backwashing. When the oxidizing capacity power of the Manganese Greensand bed is exhausted, the bed has to be regenerated with a weak potassium permanganate (KMnO4) solution thus restoring the oxidizing capacity of the bed. 1-1/2 to 2 ounces of potassium permanganate, in solution, per cubic foot of Manganese Greensand is considered sufficient for normal regeneration. It is required to vigorously backwash and regenerate the bed when it is placed in service and before its oxidation capacity is totally exhausted. Operating the bed after oxidation capacity is exhausted will reduce its service life and may cause staining.

Manganese Greensand is capable of removing up to 15 ppm of iron and manganese and 5 ppm of hydrogen sulfide. The pH level must be between 6.2 and 8.8 and must be regenerated with potassium permanganate.